EngineDance X5 Adds MDG1 Boot Mode Unlock & Bench Read/Write

What's New: EngineDance X5 now introduces Boot Mode (opening and decrypting) support for the MDG1 encryption board, delivering a new Boot Glitch Unlock solution for Bosch MDG1 ECUs (After 2021). Once unlocked, supported ECUs can be read and written in Bench with EngineDance X5—without shipping the ECU or relying on a remote service.

New Capabilities

1. Added Boot Mode for the MDG1 encryption board 

2. New Boot Glitch Unlock released 

3. Supports Bosch MDG1 ECUs (After 2021) 

4. Boot Mode Unlock 

5. Read & Write in Bench after unlocking 

Workshop Benefits

1. No shipping 

2. No Remote 

3. No waiting 

4. Unlock directly in your workshop 

Supported ECU Families

EngineDance X5 currently supports the following ECUs:

1. Bosch MD1CE100 TC299 

2. Bosch MD1CE101 TC299 

3. Bosch MD1CS069 TC299 

4. Bosch MD1CS089 TC299 

5. Bosch MD1CS012 TC298 

6. Bosch MD1CS003 TC298 

7. Bosch MG1CS042 TC298 

8. Bosch MD1CP006 TC298 

... 

Requirements

Requires the MD1/MG1 BOOT-GLITCH Adapter. 

Dual Unlock Technologies

EngineDance X5 integrates two independent unlocking technologies for Bosch MD1 ECUs, giving workshops the flexibility to choose the most suitable method for different jobs.

Boot-Glitch On-Site Unlock

1. Requires ECU case opening 

2. Supports on-site unlocking in your workshop 

3. Compatible with most TC29x ECUs

4. Supports a wider range of software versions 

5. Adds support for some gasoline models

6. Read & write on the bench after unlocking 

Remote Online Unlock

1. No shipping required 

2. No ECU disassembly 

3. Part number verification is required to confirm compatibility 

4. Continues to support the previous unlock version

MDG1 Unlock Compatibility List

Bench After Boot Unlock (After 2021)

Bosch MD1CE100 TC299 – MAN Trucks 

Bosch MD1CE100 TC299 – Volkswagen Trucks 

Bosch MD1CE100 TC299 – SITRAK 

Bosch MD1CS089 TC299 – HOWO 

Bosch MD1CE100 TC299 – FAW 

Bosch MD1CE100 TC299 – WEICHAI 

Bosch MD1CE100 TC299 – SDEC/Hongyan 

Bosch MD1CE101 TC299 – IVECO FPT 

Bosch MD1CE101 TC299 – New Holland 

Bosch MD1CE101 TC299 – Case Construction 

Bosch MD1CE101 TC299 – Case IH 

Bosch MD1CE101 TC299 – Landini Tractors 

Bosch MD1CE101 TC299 – Steyr 

Bosch MD1CE102 TC299 – Iveco 

Bosch MD1CS012 TC298 – Hyundai/KIA 

Bosch MD1CS012 TC298 – Genesis 

Bosch MD1CS003 TC298 – Stellantis (PSA) 

Bosch MG1CS042 TC298 – Stellantis (PSA) 

Bosch MD1CP006 TC298 – Ford 

Bosch MD1CS069 TC299 – IVECO 

Bosch MD1CS069 TC299 – Fiat Ducato 

Bosch MD1CS069 TC299 – Case IH Farmall 

Bosch MD1CS069 TC299 – John Deere 

Bosch MD1CS069 TC299 – Landini Tractors 

Bosch MD1CS069 TC299 – Massey Ferguson 

Bosch MD1CS069 TC299 – McCormick 

Bosch MD1CS069 TC299 – New Holland 

Bosch MD1CS069 TC299 – Steyr 

Bosch MD1CS089 TC299 – ISUZU 

Bosch MD1CS089 TC299 – IVECO 

Bosch MD1CS089 TC299 – Deutz-Fahr 

Bosch MD1CS089 TC299 – Maxus 

Bosch MD1CS089 TC299 – GWM Cannon Poer 

Bosch MD1CS089 TC299 – GWM Haval 

Bosch MD1CS089 TC299 – SAIC 

Bosch MD1CS089 TC299 – Foton 

Bosch MD1CS089 TC299 – JAC 

Bosch MD1CS089 TC299 – JMC 

Bosch MD1CS089 TC299 – HOWO 

Bosch MD1CS089 TC299 – BAIC 

Bosch MD1CS089 TC299 – MG 

Bosch MD1CS089 TC299 – Dr Motor 

Bosch MD1CS089 TC299 – EVO 

Bosch MD1CS089 TC299 – ICH-X 

Bosch MD1CS089 TC299 – Same Tractors 

Bosch MD1CS089 TC299 – Lamborghini Tractors 

Bench After Remote Unlock (After 2021)

Bosch Part Number Vehicle / ECU

0281020645 DONGFENG - MD1CE108 - P1892 - SPC5898

0281020654 YUNNEI - MD1CE108 - P1961 - SPC5898

0281020695 YUNNEI - MD1CC878 - P2270 - SPC5898

0281020692 YUCHAI - MD1CC878 - P2061 - SPC5898

0281037071 IVECO - MD1CS089 - P2096 - TC299

0281037078 IVECO - MD1CS069 - P1768 - TC299

0281036675 JAC - MD1CS089 - P2031 - TC299

0281020677 JAC - MD1CS089 - P1968 - TC299

0281036215 JMC - MD1CS089 - P1853 - TC299

0281036399 JMC - MD1CS089 - P1741 - TC299

0281037336 JMC - MD1CS089 - P1853 - TC299

0281036372 JMC - MD1CS089 - P1917 - TC299

0281020652 ISUZU - MD1CE108 - P1963 - SPC58

0281039460 JIM - MD1CS089 - P2327 - TC299

0281039581 JIM - MD1CS089 - P2213 - TC299

0281039581 JIM - MD1CS089 - P2266 - TC299

0281039679 JIM - MD1CS089 - P1967 - TC299

0281039593 JIM - MD1CS089 - P2266 - TC299

0281037245 MAXUS - MD1CS089 - P1816 - TC299

0281036116 MAXUS - MD1CS089 - P1816 - TC299

0281036114 MAXUS - MD1CS089 - P1817 - TC299

0281037248 MAXUS - MD1CS089 - SK83 - TC299

0281035944 MAXUS - MD1CS089 - P1826 - TC299

0281020693 SDEC - MD1CE100 - P1958 - TC299

0281020600 SAICHONGYAN - MD1CE101 - P1603 - TC299

0281021127 SAICHONGYAN - MD1CE101 - P1603 - TC299

0281020801 QUANCHAI - MD1CC878 - P1966 - SPC5898

0281020621 QUANCHAI - MD1CC878 - P1966 - SPC5898

0281020599 SITRAK - MD1CE100 - P1708 - TC299

0281021190 SITRAK - MD1CE100 - P1158 - TC375

0281020755 SANY - MD1CC878 - P2089 - SPC5898

Bench After Mail-in Unlock

To be updated...

www.obd2shop.co.uk

XirDecoder V3.6 Adds Original ECU File Restore Function

What's New? XirDecoder V3.6 introduces a new Original File Restore feature, allowing users to restore modified or non-original files to their original stock condition with maximum accuracy. This new function is designed to improve file handling reliability and streamline ECU file management workflows.

Key Features

Restore non-original files to their original stock state

Maximum restoration accuracy

Improved consistency and reliability during file processing

Faster workflow with reduced manual intervention

Enhanced support for professional ECU file management

License Availability

The Original File Restore feature is available exclusively for:

XirDecoder DTC Standard Version

XirDecoder DTC Ultimate Version

Functions

Original File Restore

With XirDecoder V3.6, users can recover modified or non-original files and return them to their original stock condition. The function is intended to simplify file management operations while improving accuracy and reliability throughout the workflow.

Why This Update Matters

The new Original File Restore function provides a practical solution for users working with modified files, reducing manual effort while improving consistency and reliability in professional ECU file management tasks.

www.obd2shop.co.uk

MBito OBD: Unlock Hidden Mercedes Features from Your Phone

Activate hidden features, personalize vehicle settings, and run diagnostics directly from your smartphone with the MBito OBD Device. Designed specifically for Mercedes-Benz vehicles, this Bluetooth OBD2 device connects to the MBito App to unlock coding functions, supported feature activations, and everyday diagnostic capabilities in just a few taps. Every package includes 20 MBito Credits, allowing users to start customizing their vehicle right away.

Customize Your Vehicle

Not every Mercedes setting is accessible through the factory menu. MBito unlocks a growing range of coding functions that allow owners to personalize how their vehicle looks, feels, and behaves without requiring dedicated workshop equipment.

Available coding functions include:

AMG logo on radio startup screen

Stroboscope and Knight Rider LED light effects

Start/Stop system memory

Turn signal blink count adjustment

Seatbelt reminder activation or deactivation

Fuel consumption unit conversion

Rear parking lights with DRL activation

Additional coding options continue to be added through software updates.

Unlock Supported Factory Features

Some of the most popular Mercedes features may already exist within the vehicle's software but remain inactive. MBito can activate supported factory functions when the required hardware and vehicle configuration are present, helping owners get more from their existing vehicle setup.

Supported activations include:

Apple CarPlay

Android Auto

AMG instrument cluster design

Analog power meter display

Ambient lighting customization

Diagnose Problems Before They Become Bigger Issues

Customization is only part of the experience. MBito also serves as a practical diagnostic companion, giving users quick access to vehicle health information and fault management directly from the mobile app.

Diagnostic functions include:

Full vehicle system scan

Detailed fault code reading

Fault code clearing

Whether checking warning lights or investigating stored faults, MBito helps users better understand the condition of their vehicle without additional diagnostic equipment.

Code with Confidence

Vehicle personalization should never come at the expense of safety. Before any coding operation is performed, MBito automatically creates a backup of the original vehicle settings, making it possible to restore factory values whenever needed.

Availability

MBito OBD is available now with 20 starter credits included, providing immediate access to supported coding, feature activation, personalization, and diagnostic functions.

Technical Appendix

Compatibility & Requirements

Designed for Mercedes-Benz vehicles

Function availability varies by model, equipment level, installed hardware, and software version

MBito App required

Compatible with Android and iOS devices

Bluetooth connection required

Certain functions may consume MBito Credits

Apple CarPlay and Android Auto activation depend on the vehicle head unit configuration

www.obd2shop.co.uk

TOPDON BTMobile ProS vs BTMobile Pro vs BTMobile Lite

Choosing the right battery analyzer is essential for accurate diagnostics and efficient service. TOPDON offers three reliable Bluetooth battery testers: BTMobile ProS, BTMobile Pro, and BTMobile Lite. Each model is designed to meet different workshop needs, from standard 12V battery testing to advanced 24V system diagnostics.

Let’s break down the differences to help you decide which one fits your requirements.

Final Recommendation

Choose BTMobile Pro if you need 12V & 24V capability and wider flexibility.

Choose BTMobile ProS if you use TOPDON Phoenix diagnostic tools and focus on 12V systems.

Choose BTMobile Lite if you need a budget-friendly 12V battery tester for standard vehicle diagnostics.

Each model delivers accurate battery health analysis, making them reliable tools for workshops, technicians, and automotive professionals.

www.obd2shop.co.uk

How to Update TOPDON BT600 / BT600 Plus Battery Tester

Keeping your TOPDON BT600 or BT600 Plus up to date ensures optimal performance, improved stability, and access to the latest features. This guide will walk you through the firmware update process step by step.

(The BT600 battery tester is used as an example, but the same steps apply to the BT600 Plus.)

Step 1: Download the Latest Software

1. Visit the official TOPDON website:

www.topdon.com/products/bt600

2. Scroll down and click on the “DOWNLOAD” section.

3. Download the latest software version to your computer.

Step 2: Install the Software and Log In

1. Install the downloaded software on your computer.

2. Launch the program and log in.

Note: Any valid TOPDON account can be used to log in. If you don’t already have an account, register for one using your email address.

Step 3: Connect the Device to Your Computer

1. Use the USB cable included in the package.

2. Connect the BT600 / BT600 Plus battery tester to your computer.

Step 4: Register the Tester

1. Once connected, the device information will appear in the “My Device” interface.

2. Confirm that the displayed serial number is correct.

3. Complete the registration if prompted.

Note: If your device has already been registered before, you can skip this step.

Step 5: Upgrade the Firmware

1. Click “Upgrade” in the software.

2. The system will automatically detect and display the latest firmware version.

3. Click “Upgrade” again to start the update process.

4. Wait until the software shows a successful upgrade prompt.

Upgrade Complete

Once the process is finished, your TOPDON BT600 / BT600 Plus is fully updated and ready to use. For best results, always keep your device firmware up to date.

For more diagnostic tools, updates, and technical guides, visit:

www.obd2shop.co.uk

How to Use the TOPDON BT600 Battery Tester

This guide explains how to properly use the TOPDON BT600 Battery Tester to perform battery tests, cranking tests, and charging system tests. Follow the steps below to ensure accurate and reliable results.

Before starting, connect the tester correctly:

Red clamp → Battery positive (+) terminal

Black clamp → Battery negative (–) terminal

Once connected, the BT600 will display the battery voltage and automatically enter the main menu, where you can choose Battery Test, Cranking Test, or Charging Test.

1. Battery Test

Warning:

Before testing, ensure the engine is off and all electrical accessories are turned off.

The battery test function supports 12V lead-acid batteries only (24V batteries are not supported).

Step-by-Step Instructions

① Select BATTERY TEST from the main menu and press [ENTER / PRINT].

② Select the appropriate battery type and press [ENTER / PRINT].

The battery type can be found on the battery label.

③ Select the correct battery standard and press [ENTER / PRINT].

The standard is also listed on the battery label.

Refer to the table below for battery standards and corresponding test ranges.

④ Input the CCA (Cold Cranking Amps) value using the Up / Down arrow keys, then press [ENTER / PRINT] to start the test.

Short press: adjust by ±5

Long press: continuous adjustment

⑤ The battery test result will be displayed shortly.

You can press PRINT to generate a test report, which can be printed and shared with your customer for reference.

Battery Test Terminology

Common test result definitions are explained in the table.

2. Cranking Test

Warning:

Before performing the cranking test, ensure the engine and all accessories are OFF.

This test supports both 12V and 24V lead-acid batteries.

Step-by-Step Instructions

① Select CRANKING TEST and press [ENTER / PRINT].

② The tester will prompt you to start the engine. Follow the on-screen instructions and crank the engine.

③ The test results will be displayed automatically.

Cranking Test Parameters

Cranking Time: The time required for the engine to start

Cranking Voltage: Battery voltage during engine start

Passenger vehicles: ≥ 9.6V

Commercial vehicles: ≥ 19.2V

3. Charging Test

Warning:

Always start the engine before performing the charging test.

This test supports both 12V and 24V lead-acid batteries.

Step-by-Step Instructions

1. Select CHARGING TEST and press [ENTER / PRINT].

2. Confirm the engine is running, then press [ENTER / PRINT].

3. A ripple test will be performed first.

The result is shown as a graph, and the tool will automatically proceed after 5 seconds.

4. Increase the engine speed to 2500 RPM and hold it for 5 seconds as instructed, then press [ENTER / PRINT].

5. The charging system test results will be displayed on the screen.

Charging Test Parameters Explained

Loaded Voltage: Voltage measured when electrical loads are ON

Unloaded Voltage: Voltage measured when electrical loads are OFF

Ripple:

Vehicle batteries operate on DC power, while alternators generate AC power. The diode rectifier converts AC to DC, and voltage fluctuations during this process are known as ripple. Excessive ripple may indicate alternator or diode issues.

For more automotive diagnostic tools and accessories, visit:

www.obd2shop.co.uk

TopScan Moto vs. ArtiDiag Moto vs. UltraDiag Moto

Which Motorcycle Diagnostic Tool Is Right for You?

Choosing the right motorcycle diagnostic tool depends on your budget, technical needs, and the types of vehicles you service. TOPDON offers three popular motorcycle diagnostic solutions—TopScan Moto, ArtiDiag Moto, and UltraDiag Moto—each designed for different user scenarios, from DIY riders to professional workshops.

This article provides a clear comparison to help you decide which tool best fits your requirements.

Product Comparison Overview

1. Hardware & Design

TopScan Moto is a compact, lightweight Bluetooth OBD2 scanner designed to work with Android and iOS smartphones. It has no built-in screen or battery, making it extremely portable.

ArtiDiag Moto features a 5-inch touchscreen, a quad-core 1.8GHz processor, and a built-in battery. It connects via a main diagnostic cable and is ideal for workshop environments.

UltraDiag Moto is the most advanced model, featuring a large 8-inch display, a high-capacity 10,000mAh battery, a rear camera, and both VCI and Bluetooth connectivity.

2. Diagnostic Capabilities

All three tools support:

Full system diagnostics

AutoVIN

ECU information reading

Reading and clearing DTCs

Live data stream

Bi-directional control / active tests

Standard OBD diagnostics

However, their special function coverage differs significantly:

TopScan Moto supports only Oil Reset.

ArtiDiag Moto and UltraDiag Moto both offer full service functions, such as ABS bleeding, throttle and idle relearn, clutch initialization, ECU reset, VIN writing, BMS reset, TPMS reset, personalization, and more (as supported by the vehicle).

3. Vehicle Coverage

TopScan Moto supports 7 major motorcycle brands, including Harley-Davidson, BMW, Ducati, Honda, Yamaha, Suzuki, and Kawasaki.

ArtiDiag Moto expands coverage to 15 vehicle makes, adding brands such as KTM, Piaggio, Triumph, Indian, Victory, Polaris, and Benelli.

UltraDiag Moto offers the broadest compatibility, supporting 81 motorcycle brands, making it suitable for multi-brand professional service centers.

4. Connectivity & Updates

All models support Wi-Fi software updates with one year of free updates.

Remote desktop support is available on ArtiDiag Moto and UltraDiag Moto, enabling professional technical assistance when needed.

Final Summary

TopScan Moto

Best for motorcycle owners and DIY users who need a lightweight, affordable solution for basic diagnostics and oil reset on mainstream brands.

ArtiDiag Moto

Ideal for independent repair shops and advanced users who require full service functions, a dedicated touchscreen device, and broader vehicle coverage.

UltraDiag Moto

Designed for professional workshops and dealers that service multiple brands daily and need the most comprehensive diagnostics, maximum coverage, and premium hardware.

In short, TopScan Moto focuses on portability, ArtiDiag Moto balances performance and value, and UltraDiag Moto delivers full professional-grade capability. Choose the one that matches your diagnostic needs and workload.

www.obd2shop.co.uk

TopScan Moto Wireless Diagnostic Tool – Quick User Guide

This quick user guide walks you through the basic setup and operation of the TopScan Moto wireless diagnostic tool. For the best user experience, please read and follow all instructions and warnings carefully before using this product.

1. Download and Install the APP

To begin, download the official app according to your mobile device:

iOS: Search for "TopGuru" in the Apple App Store and download the app.

Android: Search for "TopScan" in Google Play and install the app.

2. Register and Log In

Open the app and log in using your TOPDON account.

If you do not already have an account, tap Register and sign up using your email address.

3. Bind the VCI

To bind the TopScan Moto VCI (Vehicle Communication Interface):

① Tap Me > Device Management > Add VCI.

② Scan the QR code on the product to obtain the serial number and activation code.

Alternatively, once Bluetooth is connected, the app will automatically recognize the serial number and activation code.

③ Tap Activate to complete the binding process.

4. Download the Diagnostic Software

When using the diagnostic function for the first time, you must download the motorcycle-specific software:

Tap Diagnostics on the home screen.

Select your motorcycle brand and download the required diagnostic software.

5. Connect the TopScan Moto to the Motorcycle

Plug the TopScan Moto into the Data Link Connector (DLC) of your motorcycle.

The DLC is usually located under the seat or near the engine.

If your motorcycle does not have a standard OBD-II port, a compatible adapter cable** (not included) is required.

6. Turn the Ignition ON

Turn the ignition switch and the engine stop switch to the ON position.

The red LED on the TopScan Moto indicates that the device is powered on.

7. Establish Bluetooth Connection

To connect the device via Bluetooth:

① Tap Diagnostics on the home screen.

② Tap VCI in the top-right corner to connect to the TopScan Moto.

③ Once the connection is successful, the LED on the unit will turn solid blue.

Your TopScan Moto is now ready for use.

For more information, please visit:

www.obd2shop.co.uk

Topdon ArtiDiag500 vs. UltraDiag vs. ArtiDiag EU

The Topdon ArtiDiag500, UltraDiag, and ArtiDiag EU are professional automotive diagnostic tools designed for different user needs. Below is a clear comparison covering hardware, software functions, and application scenarios to help you choose the right device.

Summary of Key Differences

ArtiDiag500 is an entry-level diagnostic tool focused on essential OBD2 and basic system diagnostics. It supports full OBDII functions, CAN-FD protocol, FCA gateway access, and lifetime free updates. However, it is limited to four systems and does not support bi-directional control, special functions, IMMO, or online coding. This model is best suited for users who need a cost-effective and reliable diagnostic scanner for daily fault reading and clearing.

UltraDiag is the most powerful and feature-rich model among the three. It offers all-system diagnostics, bi-directional control, IMMO functions, 30 hot functions, Bluetooth communication, a large 8-inch screen, and extended battery life. With support for CAN-FD, FCA gateway access, repair information, and over 100 vehicle brands, UltraDiag is ideal for professional workshops and technicians who require advanced diagnostic capabilities. It includes two years of free software updates.

ArtiDiag EU is tailored specifically for European vehicle diagnostics. While it does not support CAN-FD or IMMO, it provides advanced OEM-style functions such as online coding, guided functions, and flash hidden features, along with all-system diagnostics. It also includes lifetime free software updates, making it a strong choice for users focused on EU vehicles who need coding and guided diagnostic support.

In conclusion, ArtiDiag500 offers simplicity and affordability, UltraDiag delivers maximum functionality and coverage, and ArtiDiag EU excels in European vehicle coding and guided diagnostics. Selecting the right tool depends on your vehicle coverage requirements, diagnostic depth, and budget.

www.obd2shop.co.uk

DIAGXT T80 Universal Oscilloscope: User Manual Guide

The DIAGXT T80 Universal Oscilloscope combines powerful waveform acquisition with integrated CAN analysis, making it an essential tool for automotive diagnostics and general signal testing. Here's a quick overview of its main functions.

Main Features

Universal Oscilloscope: Capture and analyze electrical waveforms.

CAN Analysis: Decode and record CAN bus data in real time.

Waveform & CAN Data Storage: Save, name, and review captures easily.

User-Friendly Interface: Intuitive controls for quick setup and operation.

How to Use DIAGXT T80Universal Oscilloscope?

① Tap "Universal Oscilloscope" to enter the waveform capture interface.

② Stop/Start: Tap to pause or resume signal capture.

③ Save: Save waveforms with custom file names (letters, numbers, and symbols supported).

1. Core Functions

Trigger

Adjust the trigger level to stabilize the waveform display. Choose from:

Auto: Automatic triggering for general use.

Normal: Captures only when trigger conditions are met.

Single: Captures a single sweep for one-time events.

Scaling

Time Scale: Measure period, frequency, pulse width, and rise/fall time.

Voltage Scale: Measure amplitude, peak-to-peak, RMS, and DC offset.

Parameter Measurement

View key metrics for each channel:

Period & Frequency

Peak-to-Peak Voltage

Duty Cycle

Auto Setup

Tap AutoSet for automatic vertical/horizontal scaling—ideal for quick signal viewing. Manual tuning may be needed for low-frequency or noisy signals.

Time Base Adjustment

Adjust the horizontal time scale (e.g., from 1 ms/div to 10 ms/div) for detailed signal inspection.

2. Waveform Adjustments

① Display: Show or hide selected channels.

② Invert: Flip the waveform 180° vertically.

③ Coupling:

DC Coupling: Shows both AC and DC components.

AC Coupling: Blocks DC to focus on AC signals.

④ Probe Attenuation: Set attenuation ratio (e.g., 10:1, 100:1) to match your probe.

⑤ Vertical Scale: Adjust volts per division for optimal waveform height.

3. Navigation & Exit

Fast Move: Use the progress bar to quickly scroll through captured waveforms.

Exit: Stops acquisition and returns to the main menu.

The DIAGXT T80 Automotive Oscilloscope offers a reliable, all-in-one solution for waveform analysis and CAN diagnostics. Its blend of automatic setup, flexible triggering, and easy file management makes it suitable for both beginners and experienced technicians.

www.obd2shop.co.uk

Celebrate OBD2shop.co.uk’s 14th Anniversary with Us!

It’s our 14th Anniversary — and we couldn’t have done it without you!

To thank all our loyal customers for your continued support over the years, we’re bringing you our biggest celebration sale of the year!

Promotion Period: September 30th – October 30th, 2025

Anniversary Special Deals – Limited Time Only!

Take advantage of these amazing discounts on some of our most popular automotive diagnostic and key programming tools:

Dolphin XP005L + Key Reader + Key Tool Max Pro – £2000 → £1984

VVDI Key Tool Plus + Solder-Free Adapters – £1845 → £1807

Xhorse Multi Prog Programmer – £615 → £568

Lonsdor K518 PRO All-in-One Key Programmer – £765 → £758

Launch X431 CRP919XBT OBD2 Scanner – £292 → £276

Launch X431 PRO3S+ Diagnostic Tool – £676 → £622

OBDSTAR X300 Classic G3 Full Configuration – £2461 → £2307

CGDI CG100X New Generation Programmer – £499 → £484

ACDP Module 38 + BDC2 Keys Learning Bench Platform – £445 → £422

Yanhua ACDP Module 33 MQB-33 + Module 34 MQB-34 – £485 → £435

Free Gifts with Every Purchase!

We’re not stopping at discounts — enjoy free gifts when you shop during our anniversary event:

Spend over £300 → Get a Godiag J2534 for FREE

Spend over £600 → Get a Godiag GT114 for FREE

Spend over £1000 → Get a Godiag GT110 + GT111 + GT112 for FREE

Celebrate 14 Years of Trust & Innovation

For 14 years, OBD2shop.co.uk has been your trusted source for automotive diagnostic tools, key programmers, and ECU solutions.

This milestone is all thanks to your trust and support — and now it’s our turn to give back with unbeatable deals and exclusive gifts!

Don’t miss out! Visit OBD2shop.co.uk

Today and join the celebration.

Let’s make this anniversary one to remember!