Super ICOM Pro N3+ Firmware Update

This post will guide you on how to update Super ICOM Pro N3+ firmware.

Upgrade file free download:

https://mega.nz/file/xnoilRaS#AhYeUW231K_vl9mMnLVGWwJZnWLGSsi4v2L3CEk-5Mo

Here comes the steps:

Step 1. Connect the Super ICOM Pro N3+ to the computer with a USB cable and power it on with a 12V power adapter.

Step 2. Open http://169.524.92.36:60080/ with IE browser, enter user name: root and password: NZY11502.

Step 3. Click "Update firmware" and you will see the version information of ICOM firmware.

Step 4. In the "Update Firmware", click on "Browse" and select the file "ICOM-Bootimage-01-31-00 .bin", set the image type to the system, and click "Send the file".

Step 5. It says "Write the image file to the flash?", click "Yes" and the ICOM light will turn red.

Step 6. When it prompts "the system image updates was successful", click "update firmware".

Step 7. Select "ICOM-Applicationimage-01-48-00.bin", set the image type to application, and click "Send the file".

The file will take a few minutes.

Step 8. It says "Write the image file to the flash?", click "Yes" and the light of ICOM will turn red for the second time.

Step 9. When it is all right, click "reboot".

Step 10. The system is going down now! Click "Home" in the upper left corner to return, and you can see the version has been upgraded to 01.48.00.

www.obd2shop.co.uk

Godiag GD101 J2534 Firmware Free Download & Upgrade Guide

Here we provide Godiag GD101 J2534 firmware free download, installation & upgrade guide step by step. Godiag GD101 is a device to work between diagnostic software and vehicle, compatible with J2534 Passthru and ELM327.

Free download Godiag J2534 Driver V2.1

Operating system: Win 8/10/11, 32/64bit (Better Not Install on Win7!)

How to install Godiag J2534 driver?

Run Godiag J2534 driver >> Select language >> Select destination location >> Select components >> Select start menu folder >> Select additional tasks >> Install

Noted to check if the Godiag J1979 driver is installed successfully.

Connect Godiag J2534 & ECU to the computer.

Computer management >> System tools >> Device manager >> Ports (COM & LPT) >> USB Serial Device(COM7)

How to update Godiag GD101 J2534 firmware?

Start Godiag J2534 software >> Connect >> Check update

Must disconnect the device before upgrading!

Disconnect >> Check update >> Update

Completed.

Now you can connect the device again to start.

www.obd2shop.co.uk