Keeping your TOPDON BT600 or BT600 Plus up to date ensures optimal performance, improved stability, and access to the latest features. This guide will walk you through the firmware update process step by step.
(The BT600 battery tester is used as an example, but the same steps apply to the BT600 Plus.)
Step 1: Download the Latest Software
1. Visit the official TOPDON website:
2. Scroll down and click on the “DOWNLOAD” section.
3. Download the latest software version to your computer.
Step 2: Install the Software and Log In
1. Install the downloaded software on your computer.
2. Launch the program and log in.
Note: Any valid TOPDON account can be used to log in. If you don’t already have an account, register for one using your email address.
Step 3: Connect the Device to Your Computer
1. Use the USB cable included in the package.
2. Connect the BT600 / BT600 Plus battery tester to your computer.
Step 4: Register the Tester
1. Once connected, the device information will appear in the “My Device” interface.
2. Confirm that the displayed serial number is correct.
3. Complete the registration if prompted.
Note: If your device has already been registered before, you can skip this step.
Step 5: Upgrade the Firmware
1. Click “Upgrade” in the software.
2. The system will automatically detect and display the latest firmware version.
3. Click “Upgrade” again to start the update process.
4. Wait until the software shows a successful upgrade prompt.
Upgrade Complete
Once the process is finished, your TOPDON BT600 / BT600 Plus is fully updated and ready to use. For best results, always keep your device firmware up to date.
For more diagnostic tools, updates, and technical guides, visit:
No comments:
Post a Comment