Hot 4 Injector Cleaner & Tester Machine 2022, How to Choose?

Here Obd2shop.co.uk have collected the latest hot injector cleaners & tester machines in 2022. Covering 4-cylinder & 6-cylinder machines from Summary, Autool, Launch, Tektino. By making a list of the differences to help consumers make a better choice.

Hot 4 4-Cylinder Injector Cleaners

Summary vs. Autool vs. Launch Comparison

Hot 4 6-Cylinder Injector Cleaners

Summary vs. Autool vs. Launch vs. Tektino Comparison

Conclusion

From the comparison table, Summary supports the most features while other brands are not or less.

However, remember to make sure the injector cleaner you're purchasing is work for your car. As choosing an appropriate machine can greatly save money than going to maintenance.

Article source: http://blog.obd2shop.co.uk/hot-4-injector-cleaner-tester-machine-2022-how-to-choose/

Solved: VXDIAG VCX SE VW ODIS "trial period has expired!"

Problem: The VW ODIS 9.10 Software for VXDIAG VCX SE is unable to open. It prompts:" Sorry, but your trial period has expired! You have exceeded 50 trial executions! Please, register this software to remove trial limitation!"

Solution

Install the unlimited patch below can solve the problem.

Free download VW ODIS 9.10 unrestricted patch:

https://mega.nz/file/0llgTITI#BfxJchSKpMAeOXX_1OtN2HO0h6tCUbpFRNbWkOH7U4w

Size:3.6MB

The patch is used to repair VW expired trial issue in 2TB Software HDD.

Any questions please contact us.

Technical support

www.obd2shop.co.uk

MTDIAG M1: Easy BMW Motorcycles Diagnosis on Phone

MTDIAG M1 is a professional diagnostic tool designed for BMW motorcycles to work on smart phone. With comprehensive function coverage, easy to use. Currently only available on Android system devices, iOS system is being developed.

Features

1. Full system diagnosis, supports BMW motor system covering engine, ABS, body, combination instrument, basic module, immobilizer, etc.

2. Covered BMW motor all series: C series, E series, F series, G series, K series, R series, S series.

3. Supports service functions: including Oil reset, IMMO key, Calibrate ESA, Calibrate SAF, Calibrate headlight, Switch off transport mode, etc.

4. Supports standard OBD2-16 pin, BMW 10-pin interface.

5. 2 years free upgrade

MTDIAG M1 BMW Motorcycles Coverage

 

Application

1. Personal motorcycle owner.

2. Motorcycle repair shop.

 

Parameters

System	Android 4.4 or above
Processor	ARM 32-bit Cortex processor
Communications	Bluetooth
Input voltage	DC 8-16V
Operating temperature	-10 to 70℃ (14- 158° F), Relative Humidity<90%
Storage temperature	- 30 to 120℃ (-22 - 248° F), Relative Humidity <90%
Dimension	150*94*40 mm
Gross weight	0.166kg
Protocols	UDS, ISO 9141-2, K/L lines, SAE-J1850VPW, SAE-J1850 PWM, CAN ISO 11898 ISO15765-4, High speed, Middle speed, low speed and single wire CAN.

 

 

Where to download MTDIAG M1 BMW App?

Scan the QR code below to free download.

MTDIAG

Version: 9.8(build 2)

Size: 33MB

How to activate MTDIAG M1 BMW?

Note: please ensure network connection is well.

1. Click Update >> Enter SN, password >> Login >> Yes

(SN & password can be found in envelope attached)

2. Enter info to activate: including name, email & company.

3. Login your email to click the link sent by MTDIAG server.

Activate success.

Compare to OBDSTAR iScan BMW

Item	MTDIAG M1 BMW	OBDSTAR ISCAN BMW
Image
Price	£283	£393
Weight	166g	700g
OBDII Scan	×	√
Full system diagnose	√	√
Auto scan/VIN	√	√
Read ECU info	√	√
Read fault codes	√	√
Clear fault codes	√	√
Live data	√	√
Oil reset	√	√
Calibrate ESA	√	√
Calibrate SAF	√	√
Calibrate headlight	√	√
Immo key programming for old models	√	×
Switch off transport	√	√
Action test	×	√
ECU programmer	×	√
Coding	×	√
CO adjustment	×	√
10 pin Cable	√	Optional
Update	2 years free	1 year free
Connection method	Bluetooth	OBD cable
Language	English	English, French, Spanish, German, Italian, Portuguese

 

MTDIAG M1 vs. OBDSTAR iScan Comparison

- MTDIAG M1 is cheaper in price.

- MTDIAG M1 is much lightweight & compact is carry.

- MTDIAG M1 supports 2 years free while OBDSTAR supports 1 year only.

- MTDIAG M1 supports wireless Bluetooth connection while OBDSTAR does not.

- MTDIAG M1 is equipped with free BMW 10pin cable while OBDSTAR is optional purchase.

- MTDIAG M1 supports to program immo keys for BMW older models while OBDSTAR does not.

- OBDSTAR iScan is featured with 5 more functions than MTDIAG: OBD2 scan, action test, Ecu programmer, coding & CO adjustment.

 

On the whole, MTDIAG M1 wins from cost performance, OBDSTAR iSCAN wins from functions coverage.

http://blog.obd2shop.co.uk/mtdiag-m1-easy-bmw-motorcycles-diagnosis-on-phone/

 

V2.51.1 Scania VCI-3 SDB3 Free Download 100% Worked

Here we provide the latest version V2.51.1 Scania VCI-3 SDB3 free download link, 100% worked & tested. No virus, rest assured download.

Free download V2.51.1 Scania VCI 3 SDB3:

Mega link:

https://mega.nz/file/Zhsi1C4L#GaEnTY01ZZnINO2ov61-0ZsCPouYpI9ZgosgWtnOKYc

Weiyun link:

https://share.weiyun.com/1Ga5bwwF (password: p3nmun)

Size: 1.07GB

Operating System: Win10 Professional

Note: Need to send ID for activation.

Language: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese

* Any questions for download, feel free to contact the online service.

How to install Scania VCI 3 Scanner?

http://blog.obd2shop.co.uk/scania-vci3-v2-50-2-free-download-installation-win10/

Solved Scania VCI 3 WIFI “unable to connect” on Win10

Question: Scania VCI 3 works well on Win10 via network cable. But if changing to WIFI, it fails. And gave an attention “Unable to connect”. I’ve connected with VCI, it looks OK. What’s the problem?

Solution: 

It needs to set up in Scania VCI-3 software after a successful VCI connection.

Path: Connection >> Connect to wireless VCI

Technical support:

http://blog.obd2shop.co.uk/

VXDIAG VCX NANO TOYOTA Techstream V17.00.020 Free Download

Here we provide TOYOTA TIS Techstream Software V17.00.020 free download links & installation guide for VXDIAG VCX NANO. Tested 100%, safe to download.

Operating system: Win7, Win10(Nonsupport Home Edition)

Where to free download TOYOTA TIS Techstream V17.00.020:

https://mega.nz/file/XmhhkYRB#HYmk2DV_m0-J174T_vWPddBFhctjZmJgZp5cax5urK0

Free download TOYOTA Techstream V16.20.023:

https://mega.nz/folder/1RthkaQS#qew4bn4flNPr2IrqFUGeLg

Free download Techstream Patch:

https://mega.nz/#F!7VZzBQgZ!wO9Fjk0gfZF-tfv6zQAqzw

Guide to install VXDIAG VCX NANO Toyota Techstream V17.00.020

Step1. Install Techstream

Run “Techstream_Setup_V17.00.020.exe” software >> Select language >> Next >> Accept agreement, Next >> Fill in details: user name & company name, Next >> Install >> Finish

Installation complete.

Step2. Install VX Manager

Run “VX Manager 1.8.6.1224.exe” software >> Next >> Select “PASSTHRU - J2534”, “TOYOTA - TechStream”, Next >> Finish

Run VX manager to check if the connection is successful:

Diagnostic >> Check if “PASS THRU” & “Toyota TIS” are with green ticks.

Step3. Run Techstream Patch

Once done, delete Techstream desktop icon. Drag Techstream patch file to desktop and run it:

Run Techstream Patch software >> Offline mode >> Next >> Select “Engine & RCT”, Next

Now you can see the test data

Done. 

VXDIAG VCX NANO TOYOTA FAQs

Q: How to do in case showing activation code?

A: 1. Upgrade firmware & licence in VX Manager; 2. Do not open software directly, run through Techstream Patch.

Q: Does TOYOTA Techstream need to activate?

A: No need. Just follow the steps above, and run via patch.

Q: How to do for connection error when selecting “Toyota launcher”?

A: Stop & close all antivirus software, firewall and security mode.

Q: Can VXDIAG Toyota support live data?

A: Yes, it supports.

Q: Does VXDIAG VCX NANO support 2006 Toyota Landcruiser UK?

A: Yes, it supports.

Q: Can VXDIAG Toyota diagnose MMT gearbox of Toyota Corolla 2005?

A: Yes, it can.

Q: 2013 Toyota, take the program to modify it, recommended?

A: Toyota TIS Techstream VXDIAG is recommended.

http://blog.obd2shop.co.uk/vxdiag-vcx-nano-toyota-techstream-v17-00-020-free-download/

Solved: SVCI 2020 “Spawn app failed: 5” Installation Error

Problem: I was not able to run SVCI 2020 software after installation. There seems to be something wrong in driver. It’s said “Spawn app failed: 5”.

“Firmware or database file open failed.”

“Connection error: interface not connected. If you have already connected the interface, please try to reconnect it and restart the application.”

What’s the problem, give me an idea?

Solution

The reason why caused the issue is because SVCI Software files were deleted by firewall or antivirus program during installation. Reinstall or change a PC to install can solve the problem. Remember to stop firewall & antivirus software before SVCI installation to avoid it.

Follow the fixed methods to solve problem:

1.Update Driver

Computer management >> Device Manager >> Universal Serial Bus Controllers >> USB Serial Converter A >> Driver >> Update Driver >> Browse my computer for drivers >> Let me pick from a list of available drivers on my computer >> USB serial Converter A version: 2.8.24.0 [10/04/2012]

USB Serial Converter B >> Driver >> Update Driver >> Browse my computer for drivers >> Let me pick from a list of available drivers on my computer >> USB serial Converter A version: 2.8.24.0 [10/04/2012]

Ports (COM & LPT) >> USB Serial Port (COM9) >> Driver >> Update Driver >> Browse my computer for drivers >> Let me pick from a list of available drivers on my computer >> USB serial Converter A version: 2.8.24.0 [10/04/2012]

Ports (COM & LPT) >> USB Serial Port (COM10) >> Driver >> Update Driver >> Browse my computer for drivers >> Let me pick from a list of available drivers on my computer >> USB serial Converter A version: 2.8.24.0 [10/04/2012]

2.Update Firmware

ABRITES QUICK START >> Click “Yes” to allow the app

Start SVCI 2020 downloader >> Update Firmware >> Start(default option: Firmware 2)

Wait until download finished.

Selected “Firmware 1 >> Start”.

Wait until downloading finished.

Wait connecting to device...

Done.

SVCI 2020 can normally work now.

* All vehicle software are workable except VW AUDI V38.1.

Read also

How to update SVCI 2020 Firmware?

http://blog.obd2shop.co.uk/how-to-update-svci-2020-abrite-commander-firmware/

Technical support:

www.obd2shop.co.uk

Free Download SVCI J2534 Ford V1.2.5, IDS125, VCI V1.0.0.0(FAQs)

Here we provide 2022 latest version SVCI J2534 Ford V1.2.5, IDS125, VCI V1.0.0.0 free download link, all were tested by OBD2shop engineer. Rest assured download.

SVCI J2534 ford V1.2.5

https://mega.nz/file/fvpkxQAR#7Drt3vyEPSRGpbe4Tum5PzKvTH-5zbPJj6p4EFOLr2A

IDS 125

https://mega.nz/file/2ng0FajQ#n9Zf600-CvQtv48W2BToBaNqf9RK2KemJjHo63ZV4mI

SVCI J2534 VCI V1.0.0.0

https://mega.nz/#!anBG3CZa!SyersJzW3BA_FLFuBBK-hFU2JwGNvuPuWhxrT6QZWsk

SVCI J2534 FAQs

1.Does SVCI J2534 support Ford 650?

Yes

2.SVCI J2534 reprogram & calibrate 2003 F250 FICM module, possible?

Yes, it supports.

3.SVCI J2534 supports Ford Mustang Roush 2014?

Yes, it supports.

4.Can SVCI J2534 rewrite Ford Escape 1.6L ECU VIN & key programming?

Yes, it can.

5.Will SVCI J2534 damage the module in case not supporting the car? 

For Ford & Mazda, it won’t.

6.Can SVCI J2534 do incode calculator for Ford 2010/ 2017 Ford Kuga?

Yes.

7.Can SVCI J2534 program 2012 Ford F-250 BCM?

Yes, it can.

8.Can SVCI J2534 work on 2015 Fusion ECM?

Yes.

9.Can SVCI J2534 program 2015 Ford Transit Custom all keys lost?

Yes

10.Can SVCI J2534 enable options in PCM speed control/ cruise control for 2008 Ford Crown Victoria?

Yes, it can.

11.Can SVCI J2534 reprogram PCM for 2009 Ford Edge?

Yes.

12.Use SVCI J2534 to do gearbox learning for 2013 Ford Fiesta, possible?

Yes. 

13.Can SVCI J2534 support 2009 Ford Edge TCM upgrade to the latest?

Yes.

14.Can SVCI J2534 program Toyota Yaris 2009 PCM/ECU?

Yes, it can.

15.SVCI J2534 supports Ford trucks?

Yes. Specific model please contact online service.

16.SVCI J2534 can reprogram 2014 Ford Explorer smart key?

Yes, it can.

17.SVCI J2534 supports 2007 Ford F-250 6.0 diesel vehicle?

Yes.

18.SVCI J2534 supports Ford Transit 2015 PATS online programming?

Yes.

19.SVCI J2534 support OEM Mazda VCI?

Yes.

20.Latest SVCI J2534 support 2010 Ford Fusion PSCM?

Yes. 

21.How to do if SVCI J2534 red light is flashing?

Press the button on device to reconnect.

22.Can SVCI J2534 read & write 2012 Ford F-350 ECU via OBD?

Yes, it can.

23.Can SVCI J2534 program 2012 Ford F-350 Super Duty ECU?

Yes.

24.Can SVCI J2534 program for 2015 Ford Fusion BCM, how to reset new VIN?

Yes. Use the IDS software.

25.SVCI J2534 supports 2017 Ford Flex to program smart key?

Yes.

26.Can FVDI J2534 program original ECU of the GEAR(TCU) online for Ford?

Yes.

27.SVCI J2534 reprogram 2018 Mazda 3 2.0G skyactiv Sportnav ABS module?

Yes.

28.Can SVCI J2534 relearn ECM & FOB separate keys for 2014 Ford Mustang 3.7L?

Yes, both can.

29.Can SVCI J2534 read & rewrite from cc3a 12a650 bda ECU on a 2012 Ford F-350 DRW 6.2L to an used ECU?

Yes, it can.

30.SVCI J2534 flash a 1999 Ford F250 V10 PCM, workable?

Yes. 

31.Can SVCI J2534 support 2012 Ford Fusion made in US?

Yes. 

32.SVCI J2534 supports 6.0 Ford Diesel power stroke 2003 Ford Excursion?

Yes. 

33.Can SVCI J2534 do transmission programming?

Yes, it can.

More any questions feel free to contact us.

www.obd2shop.co.uk