How to Use the TOPDON BT600 Battery Tester

This guide explains how to properly use the TOPDON BT600 Battery Tester to perform battery tests, cranking tests, and charging system tests. Follow the steps below to ensure accurate and reliable results.

Before starting, connect the tester correctly:

Red clamp → Battery positive (+) terminal

Black clamp → Battery negative (–) terminal

Once connected, the BT600 will display the battery voltage and automatically enter the main menu, where you can choose Battery Test, Cranking Test, or Charging Test.

1. Battery Test

Warning:

Before testing, ensure the engine is off and all electrical accessories are turned off.

The battery test function supports 12V lead-acid batteries only (24V batteries are not supported).

Step-by-Step Instructions

① Select BATTERY TEST from the main menu and press [ENTER / PRINT].

② Select the appropriate battery type and press [ENTER / PRINT].

The battery type can be found on the battery label.

③ Select the correct battery standard and press [ENTER / PRINT].

The standard is also listed on the battery label.

Refer to the table below for battery standards and corresponding test ranges.

④ Input the CCA (Cold Cranking Amps) value using the Up / Down arrow keys, then press [ENTER / PRINT] to start the test.

Short press: adjust by ±5

Long press: continuous adjustment

⑤ The battery test result will be displayed shortly.

You can press PRINT to generate a test report, which can be printed and shared with your customer for reference.

Battery Test Terminology

Common test result definitions are explained in the table.

2. Cranking Test

Warning:

Before performing the cranking test, ensure the engine and all accessories are OFF.

This test supports both 12V and 24V lead-acid batteries.

Step-by-Step Instructions

① Select CRANKING TEST and press [ENTER / PRINT].

② The tester will prompt you to start the engine. Follow the on-screen instructions and crank the engine.

③ The test results will be displayed automatically.

Cranking Test Parameters

Cranking Time: The time required for the engine to start

Cranking Voltage: Battery voltage during engine start

Passenger vehicles: ≥ 9.6V

Commercial vehicles: ≥ 19.2V

3. Charging Test

Warning:

Always start the engine before performing the charging test.

This test supports both 12V and 24V lead-acid batteries.

Step-by-Step Instructions

1. Select CHARGING TEST and press [ENTER / PRINT].

2. Confirm the engine is running, then press [ENTER / PRINT].

3. A ripple test will be performed first.

The result is shown as a graph, and the tool will automatically proceed after 5 seconds.

4. Increase the engine speed to 2500 RPM and hold it for 5 seconds as instructed, then press [ENTER / PRINT].

5. The charging system test results will be displayed on the screen.

Charging Test Parameters Explained

Loaded Voltage: Voltage measured when electrical loads are ON

Unloaded Voltage: Voltage measured when electrical loads are OFF

Ripple:

Vehicle batteries operate on DC power, while alternators generate AC power. The diode rectifier converts AC to DC, and voltage fluctuations during this process are known as ripple. Excessive ripple may indicate alternator or diode issues.

For more automotive diagnostic tools and accessories, visit:

www.obd2shop.co.uk

TopScan Moto vs. ArtiDiag Moto vs. UltraDiag Moto

Which Motorcycle Diagnostic Tool Is Right for You?

Choosing the right motorcycle diagnostic tool depends on your budget, technical needs, and the types of vehicles you service. TOPDON offers three popular motorcycle diagnostic solutions—TopScan Moto, ArtiDiag Moto, and UltraDiag Moto—each designed for different user scenarios, from DIY riders to professional workshops.

This article provides a clear comparison to help you decide which tool best fits your requirements.

Product Comparison Overview

1. Hardware & Design

TopScan Moto is a compact, lightweight Bluetooth OBD2 scanner designed to work with Android and iOS smartphones. It has no built-in screen or battery, making it extremely portable.

ArtiDiag Moto features a 5-inch touchscreen, a quad-core 1.8GHz processor, and a built-in battery. It connects via a main diagnostic cable and is ideal for workshop environments.

UltraDiag Moto is the most advanced model, featuring a large 8-inch display, a high-capacity 10,000mAh battery, a rear camera, and both VCI and Bluetooth connectivity.

2. Diagnostic Capabilities

All three tools support:

Full system diagnostics

AutoVIN

ECU information reading

Reading and clearing DTCs

Live data stream

Bi-directional control / active tests

Standard OBD diagnostics

However, their special function coverage differs significantly:

TopScan Moto supports only Oil Reset.

ArtiDiag Moto and UltraDiag Moto both offer full service functions, such as ABS bleeding, throttle and idle relearn, clutch initialization, ECU reset, VIN writing, BMS reset, TPMS reset, personalization, and more (as supported by the vehicle).

3. Vehicle Coverage

TopScan Moto supports 7 major motorcycle brands, including Harley-Davidson, BMW, Ducati, Honda, Yamaha, Suzuki, and Kawasaki.

ArtiDiag Moto expands coverage to 15 vehicle makes, adding brands such as KTM, Piaggio, Triumph, Indian, Victory, Polaris, and Benelli.

UltraDiag Moto offers the broadest compatibility, supporting 81 motorcycle brands, making it suitable for multi-brand professional service centers.

4. Connectivity & Updates

All models support Wi-Fi software updates with one year of free updates.

Remote desktop support is available on ArtiDiag Moto and UltraDiag Moto, enabling professional technical assistance when needed.

Final Summary

TopScan Moto

Best for motorcycle owners and DIY users who need a lightweight, affordable solution for basic diagnostics and oil reset on mainstream brands.

ArtiDiag Moto

Ideal for independent repair shops and advanced users who require full service functions, a dedicated touchscreen device, and broader vehicle coverage.

UltraDiag Moto

Designed for professional workshops and dealers that service multiple brands daily and need the most comprehensive diagnostics, maximum coverage, and premium hardware.

In short, TopScan Moto focuses on portability, ArtiDiag Moto balances performance and value, and UltraDiag Moto delivers full professional-grade capability. Choose the one that matches your diagnostic needs and workload.

www.obd2shop.co.uk

TopScan Moto Wireless Diagnostic Tool – Quick User Guide

This quick user guide walks you through the basic setup and operation of the TopScan Moto wireless diagnostic tool. For the best user experience, please read and follow all instructions and warnings carefully before using this product.

1. Download and Install the APP

To begin, download the official app according to your mobile device:

iOS: Search for "TopGuru" in the Apple App Store and download the app.

Android: Search for "TopScan" in Google Play and install the app.

2. Register and Log In

Open the app and log in using your TOPDON account.

If you do not already have an account, tap Register and sign up using your email address.

3. Bind the VCI

To bind the TopScan Moto VCI (Vehicle Communication Interface):

① Tap Me > Device Management > Add VCI.

② Scan the QR code on the product to obtain the serial number and activation code.

Alternatively, once Bluetooth is connected, the app will automatically recognize the serial number and activation code.

③ Tap Activate to complete the binding process.

4. Download the Diagnostic Software

When using the diagnostic function for the first time, you must download the motorcycle-specific software:

Tap Diagnostics on the home screen.

Select your motorcycle brand and download the required diagnostic software.

5. Connect the TopScan Moto to the Motorcycle

Plug the TopScan Moto into the Data Link Connector (DLC) of your motorcycle.

The DLC is usually located under the seat or near the engine.

If your motorcycle does not have a standard OBD-II port, a compatible adapter cable** (not included) is required.

6. Turn the Ignition ON

Turn the ignition switch and the engine stop switch to the ON position.

The red LED on the TopScan Moto indicates that the device is powered on.

7. Establish Bluetooth Connection

To connect the device via Bluetooth:

① Tap Diagnostics on the home screen.

② Tap VCI in the top-right corner to connect to the TopScan Moto.

③ Once the connection is successful, the LED on the unit will turn solid blue.

Your TopScan Moto is now ready for use.

For more information, please visit:

www.obd2shop.co.uk

Topdon ArtiDiag500 vs. UltraDiag vs. ArtiDiag EU

The Topdon ArtiDiag500, UltraDiag, and ArtiDiag EU are professional automotive diagnostic tools designed for different user needs. Below is a clear comparison covering hardware, software functions, and application scenarios to help you choose the right device.

Summary of Key Differences

ArtiDiag500 is an entry-level diagnostic tool focused on essential OBD2 and basic system diagnostics. It supports full OBDII functions, CAN-FD protocol, FCA gateway access, and lifetime free updates. However, it is limited to four systems and does not support bi-directional control, special functions, IMMO, or online coding. This model is best suited for users who need a cost-effective and reliable diagnostic scanner for daily fault reading and clearing.

UltraDiag is the most powerful and feature-rich model among the three. It offers all-system diagnostics, bi-directional control, IMMO functions, 30 hot functions, Bluetooth communication, a large 8-inch screen, and extended battery life. With support for CAN-FD, FCA gateway access, repair information, and over 100 vehicle brands, UltraDiag is ideal for professional workshops and technicians who require advanced diagnostic capabilities. It includes two years of free software updates.

ArtiDiag EU is tailored specifically for European vehicle diagnostics. While it does not support CAN-FD or IMMO, it provides advanced OEM-style functions such as online coding, guided functions, and flash hidden features, along with all-system diagnostics. It also includes lifetime free software updates, making it a strong choice for users focused on EU vehicles who need coding and guided diagnostic support.

In conclusion, ArtiDiag500 offers simplicity and affordability, UltraDiag delivers maximum functionality and coverage, and ArtiDiag EU excels in European vehicle coding and guided diagnostics. Selecting the right tool depends on your vehicle coverage requirements, diagnostic depth, and budget.

www.obd2shop.co.uk

DIAGXT T80 Universal Oscilloscope: User Manual Guide

The DIAGXT T80 Universal Oscilloscope combines powerful waveform acquisition with integrated CAN analysis, making it an essential tool for automotive diagnostics and general signal testing. Here's a quick overview of its main functions.

Main Features

Universal Oscilloscope: Capture and analyze electrical waveforms.

CAN Analysis: Decode and record CAN bus data in real time.

Waveform & CAN Data Storage: Save, name, and review captures easily.

User-Friendly Interface: Intuitive controls for quick setup and operation.

How to Use DIAGXT T80Universal Oscilloscope?

① Tap "Universal Oscilloscope" to enter the waveform capture interface.

② Stop/Start: Tap to pause or resume signal capture.

③ Save: Save waveforms with custom file names (letters, numbers, and symbols supported).

1. Core Functions

Trigger

Adjust the trigger level to stabilize the waveform display. Choose from:

Auto: Automatic triggering for general use.

Normal: Captures only when trigger conditions are met.

Single: Captures a single sweep for one-time events.

Scaling

Time Scale: Measure period, frequency, pulse width, and rise/fall time.

Voltage Scale: Measure amplitude, peak-to-peak, RMS, and DC offset.

Parameter Measurement

View key metrics for each channel:

Period & Frequency

Peak-to-Peak Voltage

Duty Cycle

Auto Setup

Tap AutoSet for automatic vertical/horizontal scaling—ideal for quick signal viewing. Manual tuning may be needed for low-frequency or noisy signals.

Time Base Adjustment

Adjust the horizontal time scale (e.g., from 1 ms/div to 10 ms/div) for detailed signal inspection.

2. Waveform Adjustments

① Display: Show or hide selected channels.

② Invert: Flip the waveform 180° vertically.

③ Coupling:

DC Coupling: Shows both AC and DC components.

AC Coupling: Blocks DC to focus on AC signals.

④ Probe Attenuation: Set attenuation ratio (e.g., 10:1, 100:1) to match your probe.

⑤ Vertical Scale: Adjust volts per division for optimal waveform height.

3. Navigation & Exit

Fast Move: Use the progress bar to quickly scroll through captured waveforms.

Exit: Stops acquisition and returns to the main menu.

The DIAGXT T80 Automotive Oscilloscope offers a reliable, all-in-one solution for waveform analysis and CAN diagnostics. Its blend of automatic setup, flexible triggering, and easy file management makes it suitable for both beginners and experienced technicians.

www.obd2shop.co.uk