OBDSTAR X300 DP user manual: How to Register

Here is the OBDSTAR X300 DP (Full Configuration & Standard Configuration) Register guide, please keep reading to find out more.

Step 1. Connect your VCI with the main cable and the 12V power as follows:

Step 2. Turn on tablet and connect with VCI.

1. Situation 1--- In general, it will connect with VCI automatically after turning on the

tablet as follows:

2. Situation 2---If your tablet didn’t connect with VCI automatically, please operate as follows:

Click “setting”—Enter “Bluetooth”—Click the Bluetooth name of VCI to connect

Step 3. Registration

Enter ”DP”—Enter “Setting”—Begin to register—Fill in the registration

information—Register successfully

www.obd2shop.co.uk

VPECKER E4 Tablet software 5.0 version update

Good news, VPECKER E4 Tablet Diagnostic Tool Client software can upgrade to 5.0 version. Here in this post, I will show you more details.

1，Optimize UI display.
2，Fix some bugs.
3，Improve diagnostic capabilities and communication layer stability.
4，New model software update reminder.
5，Optimization of diagnostic data flow interface interaction.
6，New freeze data stream refresh function.
7，Add history reminder for diagnostic menu click.

VPECKER E4 Tablet Upgrade and Installation in 3 steps:
http://blog.obd2shop.co.uk/vpecker-e4-tablet-upgrade-and-installation-in-3-steps/

VPECKER E4 Tablet Upgrade and Installation file download:
http://www.obd2shop.co.uk/upload/pro/vpecker-e4-tablet-update-and-installation-guide.pdf

Scania SDP3 2.34 Diagnos & Programmer Software Description

Scania Diagnos & Programmer SDP3 2.34 communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. Here is the description of it.

Scania SDP3 Features:
Check and adjustements
Conversion
Maintenance
Campaign
Bodywork
Fault Codes
Fault Reporting
Programming of Control units

Scania SDP3 language support:
English, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.

Scania diagnostic software works with VCI 2 interface:
Highest level access
Internal Scania
Industry & Marine
Authorized Scania Workshops
Bodybuilder

Note: 
1. Need Net Framework 4.5 installed on system. windows 7 or 8 will be better.
2. In order to install SDP3, administrator rights are required.
3. The USB key and VCI must not be connected to the computer during the installation of SDP3, especially not if SDP3 is installed for the first time.
The communication problems related to Windows 8 is now solved. Some problem solving reconfigurations was made Thursday the 16th of October.
4. Update ECA Please also see Scania Ti 04-14 02 16 for more information about background and regarding the update process.

www.obd2shop.co.uk

Audi A3 MQB Mileage Correction with OBDSTAR X300M & DP video guide

Here is the Audi A3 MQB Mileage Correction with OBDSTAR X300M & OBDSTAR X300 DP video guide.

OBDSTAR X300M MQB Mileage Correction for Audi A3 video guide:

 OBDSTAR X300 DP MQB Mileage Correction for Audi A3 video guide:

 

OBDSTAR X300 DP Free Update - BMW FEM/BDC Key Programming

VPECKER Easydiag Wireless OBDII Full Diagnostic Tool Vehicle coverage

Here is the vehicle model covered by VPecker Easydiag.

Area	Vehicle	Year
Japan	TOYOTA	2017
	LEXUS	2017
	DAIHATUS	2012
	HONDA	2017
	ACURA	2017
	NISSAN	2017
	INFINITI	2017
	MITSUBISHI	2013
	SUBARU	2013
	ISUZU	2010
	SUZUKI	2013
	MAZDA	2013
	FUSO	2015
Korea	HYUNDAI	2017
	KIA	2017
	DAEWOO	2011
	SSANGYONG	2013
India	MARUTI	2015
	MAHINDRA	2017
	TATA	2015
Malaysia	PERODUA	2016
	PROTON	2016
Australia	FORD(AUSTRALIA)	2017
	HOLDEN	2012
America	GM	2012
	CHRYSLER	2017
	FORD(AMERICA)	2017
	JEEP	2017
	SCION	2017
	OBDII	2017
Europe	VW	2017
	AUDI	2017
	SEAT	2017
	SKODA	2017
	BENTLEY	2013
	LAMBORGHINI	2014
	BENZ	2017
	SMART	2013
	BMW	2016
	MINI	2016
	ROLLSROYCE	2016
	PORSCHE	2016
	FORD(EUROPE)	2017
	JAGUAR	2016
	LANDROVER	2015
	PEUGEOT	2013
	CITROEN	2013
	FIAT	2012
	LANCIA	2011
	DACIA	2014
	ALFA ROMEO	2011
	MASERTI	2014
	OPEL	2011
	VAUXHALL	2011
	RENAULT	2013
	SAAB	2010
	VOLVO	2012
	ABARTH	2014
	ASTON MARTIN	2014
	BUGATTI	2014
	FERRARI	2014
China	BYD	2017
	CHANGAN	2017
	CHANGHE	2016
	CHERY	2014
	EMGRAND	2017
	ENGLON	2017
	FOTON	2017
	GEELY	2014
	GLEAGLE	2017
	GWM	2017
	HBSH	2012
	HUACHEN	2017
	LIFAN	2013
	WULING	2017
	YUAN	2014

Supported vehicle brands keep updating...

OBDSTAR X300 DP Free Update - BMW FEM/BDC Key Programming

It' s a good news that the OBDSTAR X300 DP announced the newest update of BMW FEM/BDC Key Programming. The following parts will list the functions, procedure and coverage.

BMW FEM/BDC Key Programming
Function:
BMW FEM/BDC
1.Key Programming
●Key Information
●Key Programming Preprocessing
Step 1: Code data backup
Step 2: EEPROM Original Data Backup
Step3: Service Mode Data Generation
Step 4:Service Mode Writing
Step 5: FEM/BDC Module Programming
Step 6: EEPROM Original Data Recovering
Step 7: Code Data Recovering
      ●Key Adding
      ●Key Delecting
      ●Function Introduction
      ● Operation Guide
2. Other Function
● Key enable
● Key disable
● Key status
●Key frequency
●INS reading
●DTC reading
●DTC delecting

BMW FEM/BDC key Programming Supported list:
Series Chassis                       Year
1    F20/F21                 2011-2017
2   F22/F23/F45/F46         2014-2017
3/GT  F34/F35                         2012-2017
4  F30/F31/F32/F33/F36 2014-2017
X5  F15                                 2014-2017
X6  F16                                 2014-2017

VERY IMPORTANT: 
BMW FEM/BDC key programming update only suits original OBDSTAR X300 DP Pad tablet after you update to the newest version by following the X300 DP Pad update instruction.

OBDSTAR X300 DP PAD Tablet Key Programmer Standard Configuration (SP283-B) : http://www.obd2shop.co.uk/wholesale/obdstar-x300-dp-standard-configuration.html

OBDSTAR X300 DP Pad Tablet Key Programmer Full Configuration (SP283) : http://www.obd2shop.co.uk/wholesale/obdstar-x300dp-diagnosis-programmer-key-master.html

http://blog.obd2shop.co.uk/free-updateobdstar-x300-dp-bmw-fembdc-key-programming-new-released/

Latest IDS V108.01 Full Software for Ford VCM II Features and Functions

Here is the descriptions of Latest IDS V108.01 Full Software for Ford VCM II which supports Online Programming Update to 2018.

Ford IDS V108.01 Features:
1. Comes with latest version: V108.01
2. Multi-Language: English, French, Spanish, Italian, Polish, Portuguese, and so on.
3. OS: Working 100% windows XP/ WIN7 32 64 Bits
4. Compatible with all ford VCM VCM II or VXDIAG NANO Ford IDS sale in the market.
5. Support Online programming.

Ford IDS v108.01 Functions:

1.V108.01 IDS also have the ability to download the very latest calibration/software files from ford's server if you have an internet connection available at the time of connecting to vehicles
2.Reading and decoding fault codes
3.Deleting fault codes
4.Display System current parameters in digital form
5.Combined displaying of data
6.Logs Keeping: writing and keeping of digital parameters in memory
7.Special functions: changing of permissible setting of blocks, programming etc.

Ford IDS v108.01 full software reports you can check this site: 

http://blog.obd2shop.co.uk/free-download-ford-ids-v108-01-full-software-online-programming/

Damos Winols 800GB files download on Mega with key

Provide Damos Winols files download on Mega with key.

Part 1 https://mega.nz/#F!K8tXGZoK !lZsPcb95msml8oF9IbEzQg

Part 2 https://mega.nz/#F!Xw0iDY4Z !Aj6LZykKhTeRiCTNQnIoyQ

Part 3 https://mega.nz/#F!8O5V1QAD !yMRCTkJdqnXp7QUt4CU2Qw

Part 4 https://mega.nz/#F!y8sjnRbR !YdJUwF9snjIIJ9fDmsrtNA

Part 5 https://mega.nz/#F!tm5lTYIT !pUx0tSSjMaZxnN6QWKpFzg

Damos Winols reviews:
Most suitable for professional technicians.

1. For every project the original is stored permanently. Changes will be stored as version (the number of versions is not limited). Changes are displayed in color and you can restore the original values any time.

2. Up to 50 editing steps can be undone.

3. If you work with similar cars, you can store the changes as scripts. This allows you to apply the changes for every new car within seconds.

4. You can enter comments for every project and every version. Furthermore they are automatically commented when you import or create new versions.

5. Online-database can automatically fill in the fields like producer, chassis, etc. Several other fields, like Bosch number will even be filled in automatically when you're offline.

6. The project overview shows all your projects in a configurable and searchable list. Within the fraction of a second, even if you have hundreds of projects.

7. For every project you can create as many versions as you The version over shows which maps are changed in which version.

8. WinOLS can import and export binary data, Intel- and Motorola-Hexfiles. Entire maps and the map list can be exported to Microsoft Excel. Maps can be ex and imported from a project.

9. Copy the best changes from old projects. Even if the maps were moved to a different position, they will still be automatically recognized.

10.Texts in the status bar, tool tips for the icons, Instructions for every dialog. WinOLS keeps you informed which every step.

11.Allow you learn how to tune cars.

12.Allow you learn how to find maps, how to define what they are for and to define their axes.

13.No driver and other definition files whatever

14. Can be replicated with no activation

15. Do not have built in pack and cannot realize the function of the device and that is the difference

Source for Crack WinOLS Version 1.500 with Unlock Patch
http://www.obd2shop.co.uk/wholesale/winols-version-1500-with-unlock-patch.html

http://blog.obd2shop.co.uk/damos-winols-800gb-files-download-on-mega-with-key/